Effects of thermal and mechanical activation methods on compressive strength of ordinary Portland cement–slag mortar

Activation methods and curing regimes have crucial effects on the strength of mortars and concretes. The objective of this investigation is to examine the early and later compressive strength of activated ordinary Portland cement (OPC)–ground granulated blast-furnace slag (GGBFS) mortars and identify the most effective activation technique. The methods of activation used were thermal, mechanical and thermal–mechanical combined. Two curing regimes were adopted and five groups of mortars were prepared. It was observed that OPC–GGBFS mortars have greater sensitivity to OPC mortars against the curing regimes. However, the study revealed that there was no particular activation method which when used gave the best results for both early and later strengths and did not cause strength loss. It also proved that the most effective activation method for early strength is a combination of both the thermal and mechanical, while for later strengths, none of the activation methods was recommended.     

A review of the stabilization of tropical lowland peats

The Deep Mixing Method, which involves the formation of in situ stabilized peat columns, is suitable for deep peat stabilization, whereas the mass stabilization technique is used to stabilize the soil of shallow peat deposits instead of the costly and problematic removal and replacement method. The concept of soil-cement stabilization involves the addition of water to cement, resulting in a chemical process known as cement hydration. Stabilization of peat by cement, which requires a significant strength increase in the cement-stabilized peat or organic soil, is attributed largely to physicochemical reactions that include cement hydration, hardening of the resulting cement paste and interactions between soil substances and primary and secondary cementation hydration products. The factors that affect these physicochemical reactions and the interactions of peat soil-cementation products that influence peat stabilization are the amount of solid particles, the water: soil ratio, the quantity of binder, the presence of humic and/or fulvic acids, the soil pH and the amount of organic matter in the peat. With the Air Curing Technique, stabilized peat samples for unconfined compressive strength (UCS) tests were kept at a normal air temperature of 30 ± 2 °C and strengthened by gradual moisture content reduction instead of the usual water-curing technique or water submersion methods that have been common practice in past experiments involving the stabilization of peat with cement. The principle of using the Air Curing Technique to strengthen stabilized peat is that peat soil at its natural moisture content contains sufficient water (water content from 198 to 417 %) that, when mixed with cement, a curing process takes place that causes the stabilized peat soil to gradually lose its moisture content and to become drier and harder throughout the curing period. This process does not require the addition of water.     

Investigation of the impact of global warming on precipitation pattern of Saudi Arabia

This study has been carried out to forecast the impact of global warming on the precipitation pattern of Saudi Arabia by the end of year 2100. Simulation has been done using EdGCM model software (with available 8×10 resolution) developed at Columbia University on which there have been produced global precipitation maps for the seasonal and annual averages for the last 5 years (2096–2100). For each map, EdGCM grid values surrounding Saudi Arabia are used as input to one of the tools of Eagle point software called surface modelling (SM). SM is a new approach for downscaling global climate model results. SM software modelled out isohyets at 0.2 mm/day interval. The results indicate that the present pattern of precipitation (more in winter and less in summer) is going to change by almost equal occurrence of precipitation in all seasons for double_CO₂ (2CO₂) experiment. The 2CO₂ experiment indicates an increase of about 16.05% over the annual average precipitation across the country.     

Photomechanical effects in crosslinked photochromic polymers

The effect of radiation on photochromic crosslinked polymers containing azo group side chains is investigated. After irradiation at constant sample length, the swollen gels of light-sensitive polymers exhibit a reversible increase in the elastic retractive force. The light induced conformational changes are also accompanied by changes in the swelling equilibrium and temperature of the sample due to absorption of radiation and this added complication to the interpretation of the data. Interactions of the polymer with the solvent and the heat effect were eliminated by determining the temperature dependences of the elastic retractive force for the irradiated and unirradiated rubbery dry networks. The photomechanical effect increased with an increase in the content of photochromic groups and for the polymer with 5.4 mol % of azo groups, the photoinduced contraction of the sample amounted to 1%.     

Assessment of future climate change impacts on hydrological behavior of Richmond River Catchment

This study evaluated the impacts of future climate change on the hydrological response of the Richmond River Catchment in New South Wales (NSW), Australia, using the conceptual rainfall-runoff modeling approach (the Hydrologiska Byrans Vattenbalansavdelning (HBV) model). Daily observations of rainfall, temperature, and streamflow and long-term monthly mean potential evapotranspiration from the meteorological and hydrological stations within the catchment for the period of 1972–2014 were used to run, calibrate, and validate the HBV model prior to the streamflow prediction. Future climate signals of rainfall and temperature were extracted from a multi-model ensemble of seven global climate models (GCMs) of the Coupled Model Intercomparison Project Phase 3 (CMIP3) with three regional climate scenarios, A2, A1B, and B1. The calibrated HBV model was then forced with the ensemble mean of the downscaled daily rainfall and temperature to simulate daily future runoff at the catchment outlet for the early part (2016–2043), middle part (2044–2071), and late part (2072–2099) of the 21st century. All scenarios during the future periods present decreasing tendencies in the annual mean streamflow ranging between 1% and 24.3% as compared with the observed period. For the maximum and minimum flows, all scenarios during the early, middle, and late parts of the century revealed significant declining tendencies in the annual mean maximum and minimum streamflows, ranging between 30% and 44.4% relative to the observed period. These findings can assist the water managers and the community of the Richmond River Catchment in managing the usage of future water resources in a more sustainable way.     

ASPECTS OF JOINT DESIGN AND EVALUATION IN THICK-ADHEREND APPLICATIONS

Structural adhesives are gaining wide recognition by industry as they offer engineering designers greater flexibility to achieve economic and technical advantages. In the marine industry there are potential applications for adhesives in various types of construction, for example, thick steel and composite adherends, (typically 5-15 mm thick). The applications include panels and large pipes. This article is largely concerned with the use of two-part epoxy adhesives. The purpose of this article is to understand and evaluate the weaknesses of adhesives and adherends, in relation to specific applications and to use design and material selection to alleviate them. This understanding can be extended to other thick adherend applications. This article will also highlight the impact of structural epoxy adhesive technology on the design and fabrication of steel, composite, and hybrid constructions. The benefits and inherent limitations that can accrue are quantified through three case studies related to thick adherend connections.     

Interpretation of way-finding healthcare symbols by a multicultural population: Navigation signage design for global health

The interpretation of way-finding symbols for healthcare facilities in a multicultural community was assessed in a cross-sectional study. One hundred participants recruited from Al Ain city in the United Arab Emirates were asked to interpret 28 healthcare symbols developed at Hablamos Juntos (such as vaccinations and laboratory) as well as 18 general-purpose symbols (such as elevators and restrooms). The mean age was 27.6 years (16–55 years) of whom 84 (84%) were females. Healthcare symbols were more difficult to comprehend than general-purpose signs. Symbols referring to abstract concepts were the most misinterpreted including oncology, diabetes education, outpatient clinic, interpretive services, pharmacy, internal medicine, registration, social services, obstetrics and gynecology, pediatrics and infectious diseases. Interpretation rates varied across cultural backgrounds and increased with higher education and younger age. Signage within healthcare facilities should be tested among older persons, those with limited literacy and across a wide range of cultures.     

Use of a Reflectance Spectroscopy Accessory for Optical Characterization of ZnO-Bi(2)O(3)-TiO(2) Ceramics

The optical band-gap energy (E(g)) is an important feature of semiconductors which determines their applications in optoelectronics. Therefore, it is necessary to investigate the electronic states of ceramic ZnO and the effect of doped impurities under different processing conditions. E(g) of the ceramic ZnO + xBi(2)O(3) + xTiO(2), where x = 0.5 mol%, was determined using a UV-Vis spectrophotometer attached to a Reflectance Spectroscopy Accessory for powdered samples. The samples was prepared using the solid-state route and sintered at temperatures from 1140 to 1260 °C for 45 and 90 minutes. E(g) was observed to decrease with an increase of sintering temperature. XRD analysis indicated hexagonal ZnO and few small peaks of intergranular layers of secondary phases. The relative density of the sintered ceramics decreased and the average grain size increased with the increase of sintering temperature.     

Growth of ω inclusions in Ti alloys: An X-ray diffraction study

We investigated the size and crystal structure of nanometer-sized ω inclusions in single crystals of β-Ti alloys by X-ray diffraction pole-figure measurements and reciprocal space mapping. We studied the topotactical relation of the β and ω crystal lattices, and from the positions and shapes of the diffraction maxima of the ω lattice determined the mean size of the ω inclusions and the misfit of the inclusion lattice with respect to the host lattice, as well as their changes during ageing. The lattice of the ω inclusions exhibits a large positive misfit already before ageing and the misfit is subsequently reduced during the ageing process. Using the theories of elasticity and X-ray scattering we simulated diffuse X-ray scattering around the β diffraction maxima and demonstrated that the diffuse scattering is caused mainly by local elastic strains in the β host phase around the ω inclusions.     

A new modified differential evolution algorithm scheme-based linear frequency modulation radar signal de-noising

The main intention of this study was to investigate the development of a new optimization technique based on the differential evolution (DE) algorithm, for the purpose of linear frequency modulation radar signal de-noising. As the standard DE algorithm is a fixed length optimizer, it is not suitable for solving signal de-noising problems that call for variability. A modified crossover scheme called rand-length crossover was designed to fit the proposed variable-length DE, and the new DE algorithm is referred to as the random variable-length crossover differential evolution (rvlx-DE) algorithm. The measurement results demonstrate a highly efficient capability for target detection in terms of frequency response and peak forming that was isolated from noise distortion. The modified method showed significant improvements in performance over traditional de-noising techniques.